22AWG tails cable connects LED strips to a driver or receiver. It can also link cut sections of strip to create flexible corners. For a professional finish, the cable should be soldered to the strip and covered with heat‑shrink sleeving. We offer a custom service where we cut your strip to size and add soldered tails and corners.

Because this cable is on the low‑voltage side, it can suffer from voltage drop. It is best used for short runs. For longer distances, keep the 22AWG section short and use a larger cable size, such as 1mm or 2.5mm flexible cable. An electrical contractor can calculate the correct cable size for your project.

Our 22AWG tails cable is available in lengths up to 100m. We supply up to 10m for instant purchase. For longer lengths, send us your details and we’ll prepare a quote.

• 2 core for single coloured strips
• 3 core for CCT Strip
• 4 Core for RGB strip
• 5 Core for RGBW strip
• 6 core for RGB+CCT strip

You can purchase our strip with a 1m soldered tail from the strip pages.
If you would prefer that we factory solder the tails for you, and it’s a custom configuration, click the quote button and send us the details and we’ll cost the products for you.

Prices exclude VAT at 20%

NB Product details may be subject to change without notice.